The wearing of a man wedding ring is a relatively modern phenomenon. So is the use of Titanium in Titanium mens rings.
One of the newest and classiest of the modern jewelry materials, Titanium is setting a standard in the looks of contemporary mens wedding bands.
Despite this, mens titanium rings are reasonably hard to find in your local jewelry store. Unfortunately titanium hasn’t quite made it into the consciousness of your local jewelry merchant. So if you want to find the ultimate in contemporary male jewelry, including men’s titanium rings, you have to look further affield.
Enter the internet. There is a world of choice on the net for the modern couple searching for the ideal contemporary design mens titanium wedding band.
But first, what is titanium?
Titanium is a naturally occurring element, not an alloy. In other words it isn’t just a mixture of two or more different metals to produce a third one, as alloys are. That is not to say that Titanium cannot be alloyed with other metals, just that Titanium itself is not an alloy.
It is in fact often alloyed with other metals for jewelry making to make it harder, although all Titanium including pure Titanium makes a fine jewelry material.
For the more chemically minded amongst us, Titanium is listed in the periodic table as a natural element, atomic number 22.
It was named in 1795 after the god Titan.
Titanium can even be found in space rocks. The Apollo 17 mission brought back rocks with up to 12% Titanium in them.
Because of it’s natural properties Titanium has been primarily used in the aerospace industry, and only more recently applied to jewelry making.
But why is Titanium such a great material for making mens wedding bands? A number of reasons.
Firstly it is very hard, much harder than traditional ring materials such as gold and silver. It is extremely lightweight, corrosion resistant and very strong. It is so strong in fact that rings are fashioned out of a solid block of metal, so make sure that you get your size right as resizing is usually not an option.
It is hypoallergenic, meaning that it cannot produce skin reactions or allergies as can be found with some other ring materials, though rare.
But the real reason is that it looks great! Titanium can be shaped into a wide variety of styles. It can also be colored into a stunning range of colors which can be mixed and matched.
For this reason the range of choices in mens Titanium wedding bands is much greater than for a more traditional material such as gold for example. Although gold can be altered to offer a small range of different colours, it is basically gold colored. Titanium offers a much wider range of choices in color.
Titanium also offers a choice of finish, most commonly satin, matt or polished.
Black Titanium mens wedding rings are amongst the most eye catching of all the Titanium rings. Black Titanium rings are usually a mix of black Titanium coupled with another color as an all black ring can be overpowering. But a contemporary style mens black Titanium ring is almost the ultimate in chic for the man who wants to make a statement.
Mens Titanium rings can be coupled with a wide range of precious gemstones, including diamonds, to add effect. And as Titanium is so strong it is also possible to buy tension set titanium rings.
What are these? Well the strength of the material is used to suspend a gemstone, say a diamond, between the two ends of the ring so that the gemstone is almost hanging in space in the ring. A totally modern look.
The strength of the Titanium keeps it there.
And for the more creatively minded amongst us it is possible to design your own mens Titanium ring. There are online jewellers who offer the option of making up a design for your Titanium ring that is unique only to you. You decide exactly what style, color or mix of colors you want.
Want to add a gemstone? Or more than one? Where do you want to put it in the ring? It’s all up to you.
There is no doubt that the older traditional materials used for making rings make beautiful rings. Gold or silver rings are still high on the list of choices for many men, and modern ring designs in these materials are also impressive.
But the modern man who has decided to wear his marital status on his finger shouldn’t buy a ring before he looks at the range of Titanium mens wedding rings.

The first step involved in getting a perfect fit is to get the wearer’s ring size. It is advisable for buyers to take along with them to the store, the person for whom the ring is being ordered, and choose from the selection of rings available. Even though in such cases, the surprise element of presenting the gift will be lost, it will ensure that the ring fits properly on the wearer’s finger.

When buyers want to surprise their partners at the time of presenting the platinum ring and therefore do not want them to come to the store, then there are other ways to know the correct ring size. A buyer can get a ring that his partner wears on the ring finger and take it to a jeweler for sizing. In case this is not possible they try making an imprint of one of their partner’s rings. Pressing a ring into a piece of soap, clay or other malleable substance will make an impression of it. This impression can then be taken to a jeweler to obtain an accurate measurement.

Another easy way to get a partner’s ring size is to place one of her rings on the buyer’s own finger and push it down as far as it will go. Mark the spot where it fits with a pen and then go to a jeweler who will be able to take a measurement. Buyers can also try asking the partners friends or relatives if they know his/her partners ring size.

Some stores make customized platinum wedding rings if a person is unable to find a ring that fits from the ones that are already available in the store. Some jewelers also allow the buyer to try the ring on their partner’s ring finger. They usually exchange it for another piece or refund the money if the buyer is dissatisfied with the ring.

Wedding bands became popular for men at the time of World War II. Bands are more appropriate for men because they are completely different than the style of engagement rings which are worn by women. Wedding bands are flat and make a complete circle around the finger. They are made from precious metals such as yellow gold, white gold, silver, or platinum and may or may not include some diamonds set into the ring. Because they are never-ending, they symbolize a love that lasts forever. Diamond engagement or diamond wedding rings are also circular, but they display a large diamond that protrudes from one side of the ring.
Purchasing Loose Diamonds

When looking at diamond wedding rings, you can choose from a preset ring, or you can purchase loose diamonds separately from your ring setting. By purchasing loose diamonds, you will be able to more accurately determine the quality of particular diamonds. Diamond quality is determined by the Four Cs which are cut, clarity, color, and carat. Cut refers to the proportions and shape of a diamond, clarity reveals the number of imperfections in a diamond, color measures how close a diamond is to being colorless, and carat refers to the weight of a diamond. When purchasing loose diamonds, make sure to ask for certification of quality ratings for any diamond that interests you.

source:  articlebase

If you are the type of person who works on projects or plans out events, or loves making surprises; then those creative juices are one of the key elements that definitely need to be kicking in during those times you need them.

Yet, I find that it is important for all of us to allow the creativity within us to just come out. We never know just what might come forth and it may change our lives and surprise us. If you are a married couple, you probably understand the reason why creativity continually needs to flow in your marriage.

I’m sure neither one of you ever wants to get stuck in the rut, in which your marriage becomes stagnant because neither is really growing nor things have become mundane and common. If you start realizing that this thing is starting to happen, then it is a good time to oiling that creativity within and let it out.

A great time and place to let it out would especially be during your wedding anniversaries. This only comes once a year, so it is important that you decide to go all the way. One of the best surprises you can give to your partner would be exchanging diamond anniversary rings.

If you missed out the key word, the key word there is “exchange”. Yes, it is very common for the woman to always be the recipient of such a lavish gift. However, I can’t help but to think that this is important for the man as well. Everyone would love having diamonds on their finger; that is why there is such a unity when these rings are exchanged.

There are common type of rings like the three stone diamond rings, the ring with the diamonds on the top upper half, and of course the classic “eternity” ring where the diamonds go all the way around. They all have symbols to them. However, one of the best things about anniversary rings is that you as a couple can choose your own interpretation for the diamond rings of your choice.

Another cool way of letting your creative juices flow would be to think of your own anniversary ring design. It will surely make your celebration even more delightful and meaningful because of the love and thought that you have both put in for one another. So cheers to a lifetime of more wonderful years together.

Solitaire diamond rings come in many cuts such as round, princess, emerald, eschew, marquise, radiant, pear and heart. The brighter stone is all in the cut. This makes the difference in the amount of light that is returned to viewers eyes. The skill of the cutter will unleash the light and brilliance from the rough stone. If a lesser priced diamond of excellent cut grade is compared to a higher color and clarity diamond with a poor cut, it will outshine it.

The cut of a diamond is the major factor of determining the cost of a diamond. The cut is what breaths the life into a diamond. About 5% of all diamonds are sold as excellent or ideal cut.

A diamond is eye clean if it has no flaws that is visible to the naked eye. Diamonds are graded for clarity by using a 10-power magnifying loupe. A gemologies determines the grade of a diamond. When looking for a diamond, this is an important distinction if your are looking for the best value.

The weight of a diamond is called a carat. The more the carat and less the flaws, the nearest colorless clarity and color, determines the price of the diamond. Add the metal used also influences the price of a ring. The metals to choose from are white gold, yellow gold and platinum.

Solitaire diamond rings can be created to fit almost any persons budget. Deciding on the quality, size, and metal will determine the cost. Also the design you want will make a difference in the cost. There are styles already designed or you can have a ring designed for you. There are many options to choose from.

How far down the sides the band is set is also interpreted differently by the designers. If low price market is targeted the studded part does not go very far and barely covers 1/5 of the circumference. In price focused market every diamond and putting it in its place (setting) increase the factory cost and lower the competitiveness of the price. Going half way on the other hand may not be the best option even if the budget is not an issue. Diamond pave may scrape the neighboring fingers or other rings worn there. The best ratio from economical, aesthetic and practical point of view is 2 to 3 meaning 2/5 studded and 3/5 plain. Obviously the number of diamonds is determined by their size and varies between 9 and 16. The most popular shapes used in diamond wedding bands are round and princess.

Important: Although diamond wedding bands are much easier to resize than an eternity rings the best is to be done prior the setting. Resizing diamond wedding bands with any type of setting can loosen the diamonds a cause them to fall off later. This causes plenty of frustration for the customer and the jeweler and can be avoided if the ring is manufactured with the right finger size, then set and finished. This way the join at the back is also eliminated and the band has much higher overall strength. To be able to do this the jeweler must have workshop capable of acting fast and the customer to have the patience to wait few days. In the end of the day it will be well worth. My advice is not to go for diamond band altered more than 2 sizes.

Yellow gold diamond wedding bands are something from the past. The white gold however is still the most used metal. This illustrates the conservatism of the jewelry market and it works both ways. The jewelers are offering what the customers want; the customers want what they are offered and the lack of information keeps everything new at bay. White gold is not actually white. It is the same old rich yellow gold forced into whiteness by mixing it with bleaching alloy metals. The result is yellowish grayish metal which have to be rhodium plated for bright white surface color.

The metals really suitable for white diamond jewelry are the ones from the platinum metal group – Platinum and Palladium. Platinum reemerged in the jewelry industry about 15 years ago and surprisingly fast established its name as superior to white gold. The only reason it did not shift the white gold`s default status was its much higher price. Palladium was used many years as whitening alloy metal for white gold. Its use as solo media was limited from complications in the casting process. Few years ago the technology barriers were broken and palladium is now gaining momentum. Palladium and Platinum are so similar that they are virtually indistinguishable in appearance and mechanical properties. Palladium however is 40% lighter and much cheaper providing all the advantages of platinum at about a quarter of the price thus making it the metal of choice for diamond wedding bands and for white fine jewelry in general.

There are lots of other reasons for which it is the favorite and most preferable metal. It is most ideal because it is with out any kind of irritation or skin allergy. Anyone with sensitive skin can wear this without any worry because it is most commonly alloyed with iridium or ruthenium, both of which are precious metals in the platinum metal group. Platinum only very rarely causes an allergic reaction; however, to be safe, always consult a physician.

For both men and women platinum wedding ring looks beautiful. Its intricate finishing and carving of body looks good when you wear this in your finger. Its silver white body feature and uncommon look can steal everyone’s attention towards you. It is not called the most precious metal jokingly. Another reason that men’s platinum wedding rings have become so popular is that the metal never tarnishes. Its intense luster will remain intact over the years, despite everyday wear. Further, it is not vulnerable to problems like stress corrosion or cracking. As it is strong that is why when it is used for jewelry platinum is always alloyed with a second metal only to lend the second metal extra strength and high polish. To make it soft and flexible it is done. High polished feature can be hold by adding this second metal with this metal. It also helps the platinum to resist the scratching. What is considered to be pure platinum actually contains no more than 5 percent alloy, and is often marked ”.95 Plat” inside the band. Platinum with 10 percent allow can also be purchased, and may be marked as “.90 Plat” or similar. So by the mixture of another alloy platinum can be made suitable for making jewelry like wedding ring. For making wedding ring or any kind of ring is most common and usual use of platinum. But it can be used for making any kind of jewelry like necklace, armlets, and ear rings and so on. Platinum can bear any design beautifully and marvelously.

Many kinds of wedding rings are available in the market. They differ in respect of their metal, style, size or price. Among all kinds of rings the diamond rings are the best-selling ones. Basically diamond wedding rings are more traditional than the other kinds of rings. So you can think about purchasing it.

But before visiting any shop you must be aware of some details. Sometimes it happens that the shop-keepers make a fool of you while selling a ring. Whenever you appear ignorant about the details before them, they may cheat you and sell false diamonds. But if you can prove yourself a well-informed customer they will be careful while dealing with you.

Suppose you go to a jewelry shop and you are shown a diamond but you have doubt about its purity. Then don’t hesitate to question the shop-keeper about it. If you hesitate you will be the looser. The best way to examine the diamond is to view it through the 10X viewing loupe.

Any shop-keeper can provide you stone of light colour as diamond. It happens that the light-coloured stone is kept before a black background. In these cases the gemstone looks like white diamond. What you have to do is to keep it before any white background. Then only the actual colour of it will come out. If you face these kinds of problems just try to ignore the shop.

You may be provided with the synthetic Moissanite diamond. It will look like pure diamond but it is not pure at all. To avoid duplicate diamond you must examine it through the 10X viewing loupe. There is another simple process to examine a diamond. You can simply place the diamond before any printed paper. Then just notice if you are able to see the words through the diamond. If you can read the printed letters properly then be sure that it is not a pure diamond because you will never be able to look through a pure diamond. You can just question the seller or leave the shop immediately.

Then comes the matter of its price. Generally it is seen that people are eager to buy the best wedding rings. Sometimes it happens that in this effort people are cheated. Whenever you are going to buy a ring you should see its price properly. See whether the exact price is posted on it or not. If there are cryptic codes shown then the ignorant customers may be cheated.

So to avoid cheatings be sincere while purchasing your diamond wedding ring or engagement ring.

Many women have a good idea of what they would like for their wedding ring. Unlike the process of choosing the engagement ring, you will likely have the luxury of getting her input on the choice of a band. Take advantage of the opportunity and take her with when shopping around for wedding bands, or look at bands online together. She has likely decided on one or more of the following factors: which metal she finds the most attractive, which gemstones she likes, and which basic design or effect she is looking for. Let this guide your choice of a band, since she is the one that needs to be happy with it, since she will be wearing it for the rest of her life.

Considering she most likely already has an engagement ring, you need to decide whether you want the band to match it so that they can be worn together, or whether they will be worn separately. This will likely determine the metal and shape of wedding band you will look for.

An additional factor that must be considered when choosing a ladies wedding band is whether the band would be practical and appropriate. For example, if she has petit hands, a solid, wide band is unlikely to suit her. If she does a lot of rough work with her hands, it’s unlikely that a small, delicate wedding band would last long without getting damaged. If she works in the middle of the city, it may be a good idea to purchase inconspicuous jewelry so that she doesn’t make herself a target for mugging, therefore a small, minimally decorated wedding band may be best.

One must also consider whether she has any metal sensitivities, such as a sensitivity to nickel, since this would make it impossible for her to wear low karat white gold. Also, one’s skin tone and general complexion determines whether a certain type of metal or gemstone stands out as attractive, stands out as unattractive or fades away and is hardly noticed. She should try on a number of rings, varying their color, size and basic design to get an idea of how they look on her hand.

Don’t forget that your budget is a very important factor in the choosing of a ladies wedding band. Not considering the obvious increase in price for more exotic gemstones or more valuable metals, a higher price may signify a better quality ring which is likely to be more durable. Get the best you can afford, but don’t go over budget! You are just as likely to find a beautiful and appropriate wedding band if you are only able to spend $50 as you are if you budget to spend over $1,000!

The perfect ladies band should look good, the wearer must feel comfortable with it, and it should be durable enough to last a lifetime. The band should also, generally match the engagement ring. It also won’t hurt if it has a special or unique feature such as a special engraved message inside.